• custom_built_tractor_micro_hoe_2_20131207_1619660883.jpg
  • lull_forklift_plate_mounted_micro_hoe__3_20131202_2075105461.jpg
  • kubota_b7000_compact_tractor_micro_hoe_5_20131204_1788969244.jpg
  • micro_hoe_tow_behind_conversion_3_20131202_1409399276.jpg
  • kubota_bx2200_compact_tractor_micro_hoe_2_20131214_1735318850.jpg
  • economy_power_king_compact_tractor_loader_3_20131204_1255815889.jpg
  • kubota_b5100_compact_tractor_loader_1_20131202_1392820732.jpg
  • simplicity_sunstar_garden_tractor_loader_3_20131207_1596966805.jpg
  • deutz_allis_garden_tractor_loader_1_20131202_1062146437.jpg
  • john_deere_430_garden_tractor_micro_hoe_10_20131207_1117699618.jpg
  • dynamark_garden_tractor_micro_hoe_1_20131207_1213735702.jpg
  • cub_cadet_125_garden_tractor_loader_1_20131209_1247025208.jpg
  • case_444_garden_tractor_loader_2_20131204_1738658297.jpg
  • wheel_horse_310-8_garden_tractor_loader_3_20131209_1335271019.jpg
  • satoh_beaver_s-370d_compact_tractor_loader_2_20131209_1106787973.jpg
  • case_444_garden_tractor_loader_3_20131204_2020058331.jpg
  • cub_cadet_1450_garden_tractor_loader_1_20131203_1841154183.jpg


here i am back in 2008 digging eight 5 ft deep holes for some 24" x 24" "bigfoot" post base and 10" sono tubes that will become the foundation for a new 20' x 30' workshop.

the Micro Hoe plans currently include the original size 350 lb backhoe that can dig up to 5.5 ft deep for garden tractors, and  i am also including a page that shows how the crowd arm can be lengthened 12" for a digging depth of 6.5 ft. this includes increased leverage required for the longer arm and a 2" longer crowd arm cylinder.

the extend-a-hoe prototype you see in this video is able to dig about 7 to 7.5 ft. deep or so (for compact tractors) and weighs about 425 lbs. the extend cylinder runs off a foot controlled single spool valve (under my right foot) via the power beyond port on the main backhoe controls.

the extend-a-hoe option requires a fair amount of work (and cost) to add the additional 20" reach above stock, which is why most folks end up simply creating a 12" longer single piece crowd arm with thicker wall than the stock unit for larger tractors that can take the additional weight.

thanks for watching! ~ P.F.